Nathaniel

Forum Replies Created

Viewing 6 posts - 201 through 206 (of 206 total)
  • Author
    Posts
  • in reply to: Small Glitch in Attributes for Scale Ranks #3923

    Nathaniel
    Keymaster

    The scale ranks should just be integer values. I’ve filed this as TPYEMX98YT in the Corrections system.

    in reply to: Licensing: NaturalEarth PD vs GADM license #3917

    Nathaniel
    Keymaster

    @ Sim: In several of the data download pages we list resources for further reference. In many cases they were used to inform the information shown in Natural Earth and in some cases they provide more information (in attributes and/or in line work detail) than we have. They should not be confused as the sole source for Natural Earth. Nor should they be construed as restricting the license of Natural Earth.

    The short answer is if you’re in the United States, the public domain sticker holds true for all themes. If you’re somewhere else in the world, consult your local legal authority because of the following:

    There are two cases in Natural Earth where the licensing needs a smidgen more work: Admin-1 and Marine Boundaries.

    Admin 1 – States, Provinces

    Admin 0 – Boundary Lines

    For admin-1: the following columns are dependent on GADM (the remainder are facts readily available from multiple sources):

    English type

    valid from, and

    valid to

    The Natural Earth line work is completely original and the rest of the attributes are commonly available facts that are not copyrightable.

    If you are concerned about the licensing on admin-1, simply delete these 3 columns from your copy of the file and proceed with no license restrictions. We’ve reached out to GADM to clarify this issue with them.

    For the maritime boundaries:

    The marine boundaries in Natural Earth use the VLIZ Maritime Boundaries Geodatabase that is listed in the reference section.

    VLIZ is a open-source, public domain project. We do not include half the detail in terms of attributes or resolution as the original as this theme is not of general interest. We’ve slightly modified it so it matches up with our coastline and land boundaries. If maritime boundaries are of specific interest to you, the original VLIZ files are the preferred source. They also keep them more up to date than we will. We will clarify the license with VLIZ and report back.

    in reply to: Caspian Sea boundaries #3915

    Nathaniel
    Keymaster

    @ Dagnew: The 5 nations that border the Caspian have yet to agree on formal legal boundaries between themselves. Because Natural Earth considers the Caspian part of our “oceans” theme, we include the boundaries here as maritime boundaries and show the approximate median lines. The concept of “lake” versus “sea” is somewhat fuzzy in terms of physical geography naming conventions around the world. What is legally considered “international waters” also changes over time (note access to the Baltic and Black Seas): http://en.wikipedia.org/wiki/International_waters

    in reply to: GeoTIFF extents differ from world file extents #3918

    Nathaniel
    Keymaster

    @ EdCorkery: I’ll let Tom follow up about this. My guess is yes, these are measured from the center of the pixel rather than the top left. If that is true, the extent should start at an upper left more like: -179.9916666, 89.9916666 (1/2 of 1 km grid cell size) rather than outside the 180°, 90° bounding box.

    in reply to: "Error 404 – Not Found" When trying to download NE2 1:10m #3898

    Nathaniel
    Keymaster

    @ Alex: Try downloading the files again, the download manager had to be reset for those files. https://www.naturalearthdata.com/downloads/10m-raster-data/10m-natural-earth-2/

    in reply to: Nice Job… #3899

    Nathaniel
    Keymaster

    Thanks!

Viewing 6 posts - 201 through 206 (of 206 total)